Skip to main content

Deny inbound UDP from x.x.x.x/highport to x.x.x.x/53 due to DNS Query

Where to begin with this travesty... had to switch from AT&T to Verizon so that I could use tethering at the office I work at.. and "so it begins..."

I have a Samsung SCS-SU01 which Verizon provided because I have essentially no service in my home.  When I attempted to configure/enable the device it was responding rather strange.  Specifically the GPS indicator would not change to "blue" - indicating it could not get GPS?  Anyhow, that was NOT the case, the transponder was outside via the extender cable with a clear line of sight to the sky.

I loaded my ASDM to see if I could tell what was going on and noticed


# Deny inbound UDP from x.x.x.x/highport to x.x.x.x/53 due to DNS Query
which seemed very odd since my DNS server is on the same subnet as my VZW device.

Applied the following rule and the DNS issue went away.
same-security-traffic permit  intra-interface

Now... I need to allow IPsec-passthru (I think?)

Cisco ASA 5505
Samsung SCS-SU01 - Verizon network extender




Comments

  1. AnonymousApril 20, 2022 at 6:35 AM

    Deny Inbound Udp From X.X.X.X/Highport To X.X.X.X/53 Due To Dns Query >>>>> Download Now

    >>>>> Download Full

    Deny Inbound Udp From X.X.X.X/Highport To X.X.X.X/53 Due To Dns Query >>>>> Download LINK

    >>>>> Download Now

    Deny Inbound Udp From X.X.X.X/Highport To X.X.X.X/53 Due To Dns Query >>>>> Download Full

    >>>>> Download LINK Ir

    ReplyDelete

Post a Comment

Popular posts from this blog

P2V using dd for KVM-QEMU guest

Preface: I have certainly not exhaustively tested this process.  I had a specific need and found a specific solution that worked. Situation:  I was issued a shiny new laptop running Red Hat Enterprise Linux 7 (with Corp VPN, certs, Authentication configuration, etc...)  The image was great, but I needed more flexibility on my bare metal.  So, my goal was to P2V the corporate image so I could just run it as a VM. * Remove corporate drive and install new SSD * install corp drive in external USB-3 case * Install RHEL 7 on new SSD * dd old drive to a disk-image file in a temp location which will be an image which is the same size as your actual drive (unless you have enough space in your destination to contain a temp and converted image) * convert the raw disk-image to a qcow file while pushing it to the final location - this step should reduce the disk size - however, I believe it will only reduce/collapse zero-byte blocks (not just free space - i.e. if you de...
1 comment
Read more

Extending SNMP to run arbitrary shell script

Why are we here... This is not likely something I would have pursued under normal circumstances.  I happen to be working for a customer/client who is not afforded a lot of flexibility to accomplish their goals.  In this case, the rigor is justified.  They have to sometimes be fairly creative with how they solve problems. In this case they would like to utilize an existing snmp implementation to execute a command (or shell script) on a remote system.  They came to me with the idea of using Net-SNMP extend. https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/sect-System_Monitoring_Tools-Net-SNMP-Extending.html NOTE:  This is NOT a good implementation strategy in the "real world"  it will simply allow you to test the functionality.  There are a TON of security implications which would need to be taken in to consideration. Implementation Steps: [root@rh7tst01 ~]# yum -y install net-snmp net-snmp-utils ...
Post a Comment
Read more

RHN Satellite Server (spacewalk) repomd.xml not found

"repomd.xml not found" If you add a channel, or if your RHN cache gets corrupted, and one of your guests complains that it cannot find repomd.xml for jb-ews-2-x86_64-server-5-rpm (for example) - you need to rebuild your repodata cache. Normally this is an automated job - which is exemplified by the fact that you have obviously built out your entire Satellite environment and never had to do any of the steps you are about to do. So - some prep work: Open 3 terminals to your Satellite Server and run: # Term 1 cd /var/cache/rhn watch "ls -l | wc -l" # Term 2 pwd cd /var/log/rhn tail -f rhn_taskomatic_daemon.log # Term 3 satellite-sync --channel=jb-ews-2-x86_64-server-5-rpm Once the satellite-sync has completed, you >should< see the count increment by one.  If you are unlucky (like me) you will not. You then need to login to the Satellite WebUI as the satellite admin user. Click on the Admin tab (at the top) Task Schedules (on the left) fin...
Post a Comment
Read more