Someone at work had been running RHEL on an HP DL380 G5 and blew it up. After several attempts at doing an installation that made me conclude the hardware was actually bad... I kept digging for the answer. Attempt install and Anaconda could not find any disks - try a Drivers Disk (dd.img) both cciss and hpsa. -- once we did that, when the system would reboot it would say it could not find a disk. hmmm. Boot from your installation media and interrupt the startup at grub. Add hpsa.hpsa_allow_any=1 hpsa.hpsa_simple_mode=1 to the line starting with linuxefi press CTRL-X to boot. Once the system restarts after the install, you need to once again interrupt the startup and add the line from above. After the system starts, edit /etc/default/grub and add those 2 parameters to the end of the line starting with GRUB_CMDLINE_LINUX (which likely has quiet at the end of the line currently). then run # cp /boot/grub2/grub.cfg /boot/grub2/grub.cfg.orig # grub2-mkconfig -o /boot/grub2
Linux: The whole world made it for you... This blog is a collection of things I come across either at home or at work as a Linux Administrator. I have worked as an Admin working with Solaris, SAN, Backups and Linux at the Enterprise level for over 16 years.